Australia 
Czech Republic 
Eire 
France 
Germany 
Italy 
Portugal 
Rest Of The World 
Spain 
Liqui Moly 4 Stroke Fully Synthetic Offroad Race 10W-50 1L - #3051
Order Code: LQM3051
Stock Status:
KEY FEATURES:
- Outstanding engine cleanliness
- Guarantees low oil consumption
- High resistance to aging
- Optimum lubrication under all operating conditions
- Tested for catalytic converters
- High wear resistance
- Especially suitable for wet clutches
- High shear stability
RRP:
£24.99
High-performance motor oil based on synthetic technology. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.
Specially developed for air and water-cooled 4-stroke engines exposed to extreme loads off-road. For sporting applications. Suitable for Enduro and motocross motorbikes, quads, SxS and snowmobiles with and without a wet clutch.
Specially developed for air and water-cooled 4-stroke engines exposed to extreme loads off-road. For sporting applications. Suitable for Enduro and motocross motorbikes, quads, SxS and snowmobiles with and without a wet clutch.
- Outstanding engine cleanliness
- Guarantees low oil consumption
- High resistance to aging
- Optimum lubrication under all operating conditions
- Tested for catalytic converters
- High wear resistance
- Especially suitable for wet clutches
- High shear stability
| Detail | Value |
|---|---|
| SAE class (engine oils) | 10W-50 SAE J300 |
| Density at 15 °C | 0.850 g/cm³ DIN 51757 |
| Viscosity at 40 °C | 124 mm²/s ASTM D 7042-04 |
| Viscosity at 100 °C | 18.3 mm²/s ASTM D 7042-04 |
| Viscosity at 30°C (MRV) | < 60000 mPas ASTM D 4684 |
| Viscosity index | 165 DIN ISO 2909 |
| Viscosity at -25°C (CCS) | <= 7000 mPas ASTM D 5293 |
| Pour point | -36 °C DIN ISO 3016 |
| Evaporation loss (Noack) | 4.5 CEC-L-40-A-93 |
| Flash point | 254 °C DIN ISO 2592 |
| Total base number | 7.5 mg KOH/g DIN ISO 3771 |
| Sulfate ash | 0.8 g/100g DIN 51575 |
| Color number (ASTM) | L 2.0 DIN 51578 |
